SANTIMPEX - Deva - Echipamente ATI » CETUS x12 Patient Monitor

Detalii

CETUS x12 Patient MonitorVizualizari: 2882 Cod: 680Producator: Axcent GermaniaCod producator: CETUS x12 Patient MonitorIn stoc: NuGarantie: 24 luni0.00Lei Detalii produsFeatures• 12.1” color TFT LCD screen• 8 waveform display, up to 12-lead ECG analysis• Powerful calculation (Hemodynamic, Drug Dose, Oxygenation, Ventilation)• Pacemaker detection• ST & arrhythmia analysis• OxyCRGs screen• Wired/Wireless CMS, support HL7 protocol to HIS• SpO2 pulse-tone modulation (Pitch Tone)• MEWS (Modified Early Warning Score)• Graphical & tabular trend review (120 hours)• Rechargeable Lithium-Ion Battery (2600 mAh) ConfigurationECG+SpO2+NIBP+2TEMP+PR+RESP, Li-ion battery OptionalTouch-Screen, 12-lead ECG, Masimo/Nellcor SpO2, IBP, C.O., EtCO2, Multi-Gas, BIS, NMT, VGA, Thermal Recorder, Wired/Wireless CMS TEHNICAL SPECIFICATIONS Display12.1” TFT (touch screen optional)Resolution: 800 x 600Number of traces: 8 waveforms ECGLead type:3-lead, 5-lead, 12-leadECG waveform:2 channels, 7 channels, 12 channelsDisplay sensitivity:2.5 mm/mV (×0.25), 5 mm/mV (×0.5), 10 mm/mV (×1.0), 20 mm/mV (×2.0)Wave sweep speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/sBandwidth:Diagnostic mode: 0.05 Hz~100 HzMonitor mode: 0.5 Hz~40 HzSurgery mode: 1Hz~20HzStrong filter mode: 5 Hz~20 HzCMRR >100 dBNotch: 50/60 Hz notch filter can be set to on or offDifferential input impedance >5MΩElectrode polarization voltage range: ±400 mVBaseline recovery time <3s after defibrillation (in monitor and surgery mode)Calibration signal: 1mV (peak - peak),accuracy ±3% RESPMeasurement method: Thoracic electrical bioimpedanceMeasuring lead: Lead I, IIWave gain: ×0.25, ×0.5, ×1, ×2Respiratory impedance range: 0.5-5ΩBaseline impedance: 500-4000ΩGain: 10 gradesScan speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s Pulse RateRange: 30~254 bpmResolution: 1bpmAccuracy: ±2bpm (non-motion), ±5bpm (motion)Refreshing rate: 1s TEMPAccuracy: ±0.1 °C or ±0.2 °C °F (without probe)Measurement range: 5~50 °C (41~122 °F)Channel: Two channelsResolution: 0.1 °CParameters: T1,T2 and TD NIBPMeasurement method: Automatic oscillometric methodOperating mode: Manual, automatic, continuousMeasurement unit: mmHg/kPa selectableTypical measurement time: 20~40 sMeasurement type: Systolic, Diastolic, MeanMeasurement range (mmHg)Range of Systolic pressure:Adult 40-270Pediatric 40-200Neonatal 40-135Range of Diastolic pressure:Adult 10-210Pediatric 10-150Neonatal 10-95Range of Mean pressure:Adult 20-230Pediatric 20-165Neonatal 20-105Measurement accuracyMaximum average error: ±5 mmHgMaximum standard deviation: 8 mmHgResolution: 1 mmHgInterval: 1, 3, 4, 5, 10, 15, 30, 60, 90, 120, 180,240, 480 minutesOverpressure protection: Software and hardware, double safety protectionCuff pressure range: 0-280 mmHg SpO2Measurement range: 0-100%Resolution: 1%Accuracy: ±2% (70-100%, Adult/Pediatric); ±3% (70-100%, Neonate); 0-69%, unspecifiedRefreshing Rate: 1s Masimo SET® SpO2 (Optional)Measurement range: 0-100%Resolution: 1%Accuracy: ±2% (70-100%, Adult/Pediatric, non-motion, low prefusion); ±3% (70-100%, Neonate, non-motion); ±3% (70-100%, motion); 0-69%, unspecifiedRefreshing Rate: 1s Recorder (Optional)Built-in, Thermal dot arrayHorizontal resolution: 16 dots/mm (25 mm/s paper speed)Vertical resolution: 8 dots/mmPaper speed: 25 mm/s, 50 mm/sNumber of waveform channels: 3 Operation EnvironmentPower: AC 100-250V, 50/60HzTemperature: 5-40 °CHumidity: <80%Patient Range: Adult, Pediatric, Neonate Va rugam sa ne contactati pentru oferta de pret!Echipa SANTIMPEX  <a href="http://www.santimpex.ro/ati/cetus-x12-patient-monitor">http://www.santimpex.ro/ati/cetus-x12-patient-monitor</a>